Discussion Of The AOD, C4, Powerglide, etc
Sticky Threads
Do you have an AOD in your car? Post up your combo. This thread will help folks see the potential the AOD has and we can start to accumulate...
The question of how do I build a bullet proof AOD is always coming up, so I thought I'd start a thread on the topic. Here is what I have found be...
http://s93.photobucket.com/albums/l47/silverfoxbody/SILVERFOX%20TRANSMISSION/EPOXY%20MOD/ PICS IN POST 47...
This is CCR's 92 project coupe which I have been working on for the past 2 years. I picked the coupe from the classifieds here on Click Click...
Choosing the correct transmission cooler for your application. There are many factors to consider when choosing a transmission cooler. From...
Here are various methods for setting the AOD TV Cable: Tech Articles: ...
Here is a good link for the size fittings you will need on various trannies for the cooler lines.
The swap of a 4R70W into a FOX or early model S95 chassis is popular, but instruction is elusive. The Members of CCR and me will provide up to date...
AOD/E/4R Transmission 101: Questions/comments Post here http://www.clickclickracing.com/forums/showthread.php?p=21949#post21949 For you many...
This link will take you to a copy of a condensed essay of the popular AODE/E/4R High Performance Mods sticky. ...
1- Beast sun shell is a must 2-sonnax or fairbanks super servo is a must affects not only 2nd but the back side of the servo is the 3-4 clutch...
HIGH PERFORMANCE C4 MODS: PICS ARE AVAILABLE HERE http://s93.photobucket.com/albums/l47/silverfoxbody/SILVERFOX%20TRANSMISSION/C4/ This thread...
AOD CONVERTERS LOCKUP vs NONLOCK http://www.clickclickracing.com/foru...ead.php?t=1163 TECHNICAL READS and PICS! AODE/4R...
C4 Transmission 101: C4 Story (Barrowed from MustangCentral http://www.mustangcentral.net/tech/c4.html) C4 DIAGRAM: Complete C4 Crash...
Normal Threads
Is there a advantage to doing either a forward or reverse manual valve body on a C4? I know some reverse vb's do not engine brake in 1st. Anyone have...
Hello, new guy here name is dwayne, ok i have an 89 Coupe with 5 Spd, with your basic heads cam intake 14-15 psi boost vortech setup. now my...
408 w/built 4r70w and full tune, making 440rwhp n/a have had this issue since i got the car running, and ive had the tuner mess with this on a...
im going to buy some lentech converter actually its the Part# 7902-CONV-12 SS its a 1800-2200 rpm stall converter, i have a 91 gt mustang with a 5.0...
I put in a performance built AOD and everything was running great, until after I ran the car on a road course. I got half way home then it started...
Hello all, I just signed up on this forum and have some questions. I have a 69 Mach 1 with a factory 428CJ Holley 4 barrel and C6. I am going to...
Hey Gang. I put in a new valve body. I have the tv cable adjusted and it has good shifts but when I'm going around 40mph and I mash the gas the...
I have a 1990 AOD Mustang LX that I swapped a 2003 V6 4R70W into with the Baumann TCS and harness. Cruise control quit working after the swap but it...
I want to rebuild one of my AOD. What I need to know is if I need any special tools. Thanks for the help Kyle
Would the same converter fit a aod and a 4R70w as long as they are both used with the same spline 1 piece input shaft?
I have a C4, number on the top of the case is A26X, number on the back of the bell is RF-D5-ZP-7976-AA I was hoping someone could decode this for...
Hey guys quick question .. If you bolted a tailshaft housing from an AOD up to a 4R70W would a slip yoke for an AOD fit? I think it would...
I have an AOD with a Lentech manual valve body. When I shift from first to second, there is a 100-200 rpm delay. When I shift from second to third...
A while back I mated an AOD to a 351W with a Pionner FRA205 flexplate. I read here about making sure the torque converter seated all the way. I...
Did some searching and seems like a great idea. Any one know if a condensor from a 94 V6 mustang will fit in a fox body? Other recommendations ive...
My friend just got done his AOD rebuild (his first time messing with a trans,in his backyard,need I say more?), Reybestos clutches and a gasket/seal...
Just curious... they quoted me $165 shipped for a 2800-3200 stall converter for my C6. Obviously I have concerns as that is DIRT cheap! they do...
Need some advice on my AODE tranny issue. This is in a turbo 347 Mustang. The tranny was rebuilt a few hundred miles ago with all the good parts...
I have a chance to pick up an AODE out of a 95 V6 mustang fairly cheap. I am wanting to upgrade my current AOD to a 2 inch OD band. Will the AODE...
I am asking this for somebody else, so I will try to put in as much info as I can. The car is a stock 04 gt with a 4r70w (of course). I have been...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
