Forum: General Click Click Tech

yes i have a 1986 mustang 5.0 automatic and i have a tci c6 transmission with a stage 2 shift kit to put it in it i need to know what other parts i...

I have my trans sitting here upside down with the pan off because I just finished putting the valve body back in and I decided it would be a good...

I have a mass air converted mark vii and after I have it warmed up and go to start it, it will start normal then start to hunt for the correct idle...

Just got the trans rebuilt with new converter, six disk borg warner clutch packs, and other misc. thing for rebuild, and a precision converter. there...

Currently have a hammer shifter. But after switching from a forward pattern AOD to a reverse pattern C4, I have a knack for shifting into neutral...

Hi, I've just about wrapped up the 4R70W retrofit in my '67 fastback, and was wondering what size trans cooler you guys are running. I've got a...

So, I'm getting ready to do my yearly maintenance on my stock tranny and was wondering if it is worth changing out the valve body to an aftermarket...

ok so im getting ready to start modding my motor and i have a few questions about my tranny. so heres my build. keep in mind i am starting with a...

I've seen in the one sticky the disassembed items, but curious if it is done with just removing the tailhousing or does the trans have to be...

Since i've been unsucessfull in finding out how to decifer the ID of the '02 mustang GT 4R (should the 6 digit serial number match the last six...

are the 98 and up 4r70w the same . my choices are a v6 mustang,v8 e150,v8 crown vic i want to get the wide ratio gear set.

I got a Lokar shifter with the new selector shaft thats supposed to work with the 4R. But looking at the new selector shaft, there doesn't seem to be...

I bought a 4R that was supposed to be from an '02 GT. Is there any way to confirm that? Should the vin number from the car match the numbers on the...

I can't find a straight up answer as to what dipstick works with the 4R70W in a Fox Mustang. I picked up a 4R70W today and it didn't have a dipstick...

I own a 1988 Mercury Grand Marquis that has been an on-going project for about six years. The direction of the project setup has gone from racing to...

hey, ive about got my mustang complete but, i dont know exactly how to install these lines from the other side of the transmission. I know i got all...

My aod is supposed to have brauman shiftkit and epoxy mod. At what rpm's should it be shifting under normal driving.

I am shooting for high 11's in my Fox, the motor wont be a problem but what about the AOD? What are the first things i should change in order to...

Like the title says...is it fine?