PROXT
10-09-2010, 07:27 PM
Hi I have just brought a NOS cheetah nitrous kit and wanting to hook it up. I also have these following parts to hook up. Also have a msd 7al3 ignition in car. Also are 20amp relays enough and what amp wire would you suggest. Is it possible for you to do me a diagram for all of this setup. I know one thing that with me on the transbrake with foot flat to the floor it would normally activate the micro switch. I know there must be a way around this. Any help would be much appreciated.
NOS Single Stage Plate System- Cheetah
Nitrous Progressive Controller Part # 15835BNOS
Purge
Nos Thermostatically Controlled Bottle Heater
Transbrake
Wot Switch
Fuel Pressure Switch
NOS Single Stage Plate System- Cheetah
Nitrous Progressive Controller Part # 15835BNOS
Purge
Nos Thermostatically Controlled Bottle Heater
Transbrake
Wot Switch
Fuel Pressure Switch