Will a 2-step help?

[Fatstang]

I have a C4 that stalls to 4500 on the trans brake. Will a 2-step help my 60's/ET's launch at a lower rpm with a 2-step? I just paid for one (MSD - for COPS on a 2v) that i will install next week most likely. Where should i set it to? can i wire to the T-brake button to activate? I've been trapping 127mph, going 10.8's with mid 1.5's and hope/should get 1.4's on a 28x10.5x15 slick and 4.10's - 2003 Mustang GT

[Fatstang]

just recieved my MSD Launch Master 2-step. Question, how do i wiring to my trans brake button? Take the activation wire (white/blue) and connect it to one of my leds on the button? which side, the pwr or ground side? if power, that means id have 2 wires leading to the button on the power side? the original coming off a fuse tap.
http://www.msdignition.com/Products/Ignitions/Distributorless_Ignitions/Accessories/8734_-_Launch_Master_for_Modular_Ford_Engines.aspx

[RdRunnr]

You should set the two step 500-700 rpm below where the converter stalls. The two step should help your 60' times.