94 ranger clutch problem

[russell]

I HAVE 94 RANGER PUT NEW EVERY THING FOR CLUTCH ON IT, SLAVE, MASTER, CLUTCH , PLATE. PUT IT ALL TOGETHER BLED IT OUT AND NOTHING PEDDLE FEELS SOFT SLAVE NOT MOVING. I DON'T KNOW WHAT TO DO NOW.:mad:

[DirtyD0g]

That is not an easy system to bleed. Keep bleeding, you have to kick the pedal fast to vibrate bubbles out of the system. Make sure the master cylinder isn't leaking on the floor. If after a good effort it still isn't right go tighten the pressure plate bolts you left loose.
Alan

[SilverFox]

bleed the master for sure with a short section of hose, doubled back to the rez, get rid of the air here is key. Then let the line gravity bleed, just crack the peddle a little, when it drips, connect to the slave ad bleed there manually with a freind.
It sucks balls to bleed this system.

[russell]

i did just as u guys said and it fixed it thanks alot!!!