PDA

View Full Version : #1 plug fire



sjhm9102
09-30-2009, 12:01 AM
number 1 plug not firing all others are fine everything new except distributer

jayh
09-30-2009, 08:08 AM
you have no spark out of the distributor? have you tried swapping wires and plugs from another cylinder? do a compression test on #1?

sjhm9102
09-30-2009, 02:52 PM
i did that i have fire now but still a miss maybe injecter or distibuter still white smoke out exhaust right side lean code 41 koeo compression is 180 all the way across

jayh
09-30-2009, 04:56 PM
white smoke is usually coolant.

sounds like intake gasket but could be head gasket

sjhm9102
10-01-2009, 03:29 AM
it doesnt get hot just misses if its a head gasket ill just get a can of headgasket repair k&w till i have the money to rebuild the whole engine and why would i have 180 psi compression with a bad gasket?

jayh
10-01-2009, 06:55 AM
your right it must be an intake gasket

sjhm9102
10-02-2009, 02:50 AM
im thinking more of a bad injector or distibuter can also effect injector pulse i hope its not a intake gasket anyways gonna buy a can of seafoam and run it thru the tank of gas

Big C
10-02-2009, 12:03 PM
I wouldn't do that. Intake gaskets aren't that expensive. Putting that stuff through your engine could gum up stuff in your engine.

jayh
10-03-2009, 10:09 AM
sea foam definately wont gum anything up but will clean everything. it wont fix a coolant leak though. intake gaskets are around $12

sjhm9102
10-04-2009, 01:54 AM
i dont have a coolant leak i dont think so....i put the seafoam in the gas and ran tip top for a day been sittin for 2 days so far and its raining maybe an injector leak after turning car off will see.

jayh
10-04-2009, 01:38 PM
white smoke= coolant
black smoke= fuel
gray/blue smoke= oil

sjhm9102
10-07-2009, 12:15 AM
ok after it sits for like 4-5 hours theres fuel on the plugs i mean soaked

jayh
10-08-2009, 03:00 PM
do you have an extended crank after the car sits?

sjhm9102
10-08-2009, 03:55 PM
no it always starts right up after bout 3-4 turns

sjhm9102
10-17-2009, 12:01 AM
ok now i got th injector working with a replacement computer now its bucking bad maybe the replacement mass air meter i put on at the same time i got the code 66 with the bad computer

jayh
10-17-2009, 08:55 AM
ok after it sits for like 4-5 hours theres fuel on the plugs i mean soaked

but the injector wasnt firing? you tested it with a noid light?

sjhm9102
10-18-2009, 05:26 AM
yes the injector is firing now replaced computer

sjhm9102
10-29-2009, 05:21 AM
fixed the bucking missing issue replaced distributer