baumann shift kits were can they be bought

[workinprogress]

I am going to put a shift kit in my car over the winter and have heard nothing but good things about them were can they be bought thank you

[87vert]

Directly from them. Just give them a call.

http://www.becontrols.com/products/aodcat.htm

[RdRunnr]

Have you thought about installing a nice valve body instead of a shift kit? You would be even happier with a nice Lentech Street Terminator valve body.

[87vert]

Have you thought about installing a nice valve body instead of a shift kit? You would be even happier with a nice Lentech Street Terminator valve body.

Thats the valvebody im going with :) But for the cost the Baumann is sweet.

[RdRunnr]

Have you thought about installing a nice valve body instead of a shift kit? You would be even happier with a nice Lentech Street Terminator valve body.

Thats the valvebody im going with :) But for the cost the Baumann is sweet.

That's the valve body I run too and couldn't be happier with it. Bauman's site is http://www.baumannengineering.com/ . You can order right from them if you do want to do the shift kit.

[87vert]

That's the valve body I run too and couldn't be happier with it. Bauman's site is http://www.baumannengineering.com/ . You can order right from them if you do want to do the shift kit.

Thats the old website =)

www.becontrols.com is the new one.

[red89notch]

That's the valve body I run too and couldn't be happier with it. Bauman's site is http://www.baumannengineering.com/ . You can order right from them if you do want to do the shift kit.

Thats the old website =)

www.becontrols.com is the new one.

I may be interested in buying your vb w/ baumann installed.. :?:

[red89notch]

That's the valve body I run too and couldn't be happier with it. Bauman's site is http://www.baumannengineering.com/ . You can order right from them if you do want to do the shift kit.

Thats the old website =)

www.becontrols.com is the new one.

I may be interested in buying your vb w/ baumann installed.. :?:

87vert , interested? :?:

[87vert]

you'd have to wait till I got my new one installed lol.

[red89notch]

No problem , send me PM on here or Corral.net , same name.. You seem like an honest person , so I wouldnt have a problem buying a part like that , let me know. Thanks.

[87vert]

theres a kit on ebay i found

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=46103&item=7948940710&rd=1&ssPageName=WDVW

15bux aint bad ;)

[red89notch]

Thanks , but Id prefer a stock vb w/ it already set up , so I can just swap out , otherwise Ill just end up spending the $400 for Lentech , let me know about yours if you take it out /want to sell , thanks.