Wiring Q on 86

[tiny4lx]

My car is carb right now but considering to fi. I have a complete wiring harness out of a 91 with a A9L computer and all other harnesses[injector harness,main harness].My Q is can i plug the harness in and where do i get power [kapw,sapw,grnd]?Now i know 86 came fi but mine was a 4-banger in the past,are the same wires going to be in the car.What im getting at is it going to be plug and go or run wires and waite :D
thanks

[RdRunnr]

Darin (frdfandc) just did this on his four eyed recently, so hopefully he will see this and chime in...

[tiny4lx]

Thanks RdRunner

[tiny4lx]

Thanks RdRunnr

[frdfandc]

All you are going to need is the engine wiring. When I installed mine, I used the FRPP kit that Summit has in their catalog. You should get yourself a good wiring diagram. I'll look into what I have at home and try and give you some information from them.

I do know, some of the wiring had to be cut/spliced into the original wiring harness for KAPW, and ignition power.