camshaft

[workinprogress]

I was wondering and hoping that someone can give some advice on the cam question that i have i have a 91 lx aod with a 2600 stall converter and i would like to know if the e,f303 or the trick flow stage 1 cam would be good for my converter

[fast5liter331]

They should all work pretty well. What else do you have done to the motor? The e cam is the only emission legal cam.

[workinprogress]

the mods that i have are gt 40 heads off of a 95 cobra, cobra intake, cold air, 75mm mass air, 65mm throttlebody 2600rpm stall converter and i still have the stock 2.73 gears in the rear i was just wondering about the f cam because i never have heard of anyone using one

[COME CORRECT]

The F-303 will work real well with your setup. Just check your valve springs. :D A good tune and with the F303 in the making you will have some to end fun witht those gears. Step up to 3.73 and thing happen real fast from there.