Here goes! Built AODE into 93 vert.

[forgotn]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/253841_2095080622590_1412550080_2451638_4843604_n. jpg:lift:


Got this little unit to control the new one. New Baumann Optishift. Baumannator is no longer available. https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/255119_2095260227080_1412550080_2451939_7838879_n. jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/223362_2021016011021_1412550080_2347718_1448288_n. jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/223362_2021016051022_1412550080_2347719_54648_n.jp g

94 AODE built with hardened input shaft, red alto clutches, transgo shift kit, 3300 stall lock-up converter.

[Rob Matuszko]

Allways loved a clean white fox-body stang.Good luck !!!!

[forgotn]

Anyone have any input on using the stock shifter lever? I have the 94 mustang shifter cable and shifter lever that was originally with this transmission. I'm trying to figure out if I can mount the 94 shifter lever in place of my 93 so I can have the button and wires already in place for the O/D button. Silverfox???

[gator72007]

http://www.mgwltd.com/mustang_t-style_aod_knob.shtml

dont know if this helps or not

[SilverFox]

I would use the STOCK vb in place of the transgo unit first....you might find tunning it in much more pleasant.

[forgotn]

I am good friends with one of the best tuners in my area so the tuning part I have covered. How about the shifter? Stick with 93 or go with 94? I'm trying to button this thing up soon but I can't find any information. Baumann says you need a shifter cable from a 94 mustang but the end that snaps onto the buttom of my 93 shifter lever is too small. Not sure what to do at this point and I don't want to start modding things if there is an easier solution. Gators post is something I would be interested in if I am forced to use the stock shifter.

[SilverFox]

make the 93 work