Radiator/Fan Recommendation.

[jimzilla]

Hello everyone and Merry Christmas. I need some cooling system tech for my project. 1988 GT Mustang, 331 stroker, procharger D-1SC. Hoping for 650-700 HP. I need a radiator and fan recommendation that will fit into the space I have. I have included some pics. The pictures show a stock radiator (for reference) with a 1 ½”core, 2 ½” tanks and the crank pulley for the procharger. I will also be using an oil cooler; I don’t know what size? and a transmission cooler, 20,000 GVW. This is a street car that will see stop and go traffic in the Florida heat and the occasional auto cross event. If you need more info let me know. Thanks

[micheal985]

The 1995-1999 ford contour dual fans are what I use. I got my fans for pull a part for less than 30 bucks. Measurements are 24" wide by 16" tall by 3.4" at the deepest deep. This thing move around 3400 cfms of air. I was having problems cooling my car. When I hit the Hwy My car ran cool 180 deg. But when I got on the on ramp, heading back to town, my temperture would rise. I installed this fan and now when I get on the on ramp my temp start dropping and one fan turns off. MM&FF did a install article on these fans. http://www.musclemustangfastfords.com/tech/mmfp_0907_thermostatically_controlled_electric_fan _upgrade/index.html
Happy Holidays
Micheal